Maintenance - sesteam engine Car Service in mumbai

Maintenance

CARE INSTRUCTIONS

Your car is now protected with the leading nano surface protection brand. SE STEAM ENGINE is Glad to protect your factory clear coat, provide a protective shield against the elements and to keep your vehicle looking new at all times.To maximize the effects of SE STEAM ENGINE Ceramic coating/PPF Service and to ensure your investment is long lasting, we will discuss a few basic maintenance steps on how to care for your new Ceramic coating/ PPF Service. ride it.

Use (2 Buckets Technique)

THE CURING PROCESS

(Complete Drying Process of the ceramic coating)

Curing time is 2-3 weeks depending on environmental conditions such as humidity and temperature. During this time, the following should be avoided:

1.The coating will protect your clear coat from water spots. The coating is less likely to etch than your factory clear, but it can get spots during the curing process. Parking under a shedding tree.
2.Allowing bird droppings, sap or pollen to sit on the car and bake in the sun.
3.While washing or abrading the paint, keep in mind the coating is soft; be gentle when working on the paint.

WASHING YOUR CAR AT HOME Minimize rubbing, (especially with a dry towel) on the coating will ensure its longevity.

1. For best results the car should be washed on a bi-weekly basis to avoid excessive contamination build-up. Use only recommended mild soaps.
2. Use 2 Buckets Technique to wash your Protected car.
3.While washing. Avoid high volume brush style car washes, and high PH detergent style cleaners.ng or abrading the paint, keep in mind the coating is soft; be gentle when working on the paint.
4. Avoid washing in direct sunlight to minimize streaking and water spotting.
5. Wash from the top down leaving the dirtiest sections for last to avoid cross contamination.
6. Use separate soap and sponge/mitt/towel for wheels to prevent cross contamination.
7. Avoid Using Petroleum Based products for washing.
8. For Best Maintenance visit our nearest store

METHODS OF WASHING

1. Standard Home Washing
Use a foam gun (optimal) or microfiber wash mitt to soap down the car. Rinse it off with a pressure washer (optimal) or hose. Dry with clean microfiber towels.

2. Car Washes
Touch-less car washes only. Never use a car wash with brushes! Never select the “spray wax” option.

DRYING
1. Always dry completely and never leave to “air” dry. Tap water contains minerals that may leave deposits creating water spots.
2. Only use quality microfiber towels for best results and avoid aggressive wiping, allowing the material to absorb the water.

SPOT REMOVAL
1. Never use aggressive products to polish the coating or remove surface contamination.
2. Never use excessive force to remove spots.
3. Get your vehicle supervised at SE STEAM ENGINE nearest store, with our experts.

LEATHER AND FABRIC MAINTENANCE PROGRAM
1. For best results, all leather/vinyl surfaces should be cleaned bi-weekly with a leather protectant to avoid contaminant build-up and replenish the natural oils.
2. Vacuum carpets regularly and use carpet & fabric cleaners when necessary.
3. Immediately wipe off spills on leather, vinyl, or fabric.

ANNUAL INSPECTIONS

1. Annual Inspections are the recommended process for ensuring the coating is maintained and care for the vehicle is properly executed. Annual inspections should be carried out by an approved applicator within 30 days before the anniversary date of the last service to ensure peak performance.

2. Although durable and long lasting, annual inspections ensure maximum gloss and protection from STEAM ENGINE.

Get In Touch

Virar Branch :
194 b/1,Agashi gujbhat, Virar West, 401301

Mira road Branch :
Shivar Garden, Next To KFC, Mira Bhayandar, 401107

Naigaon Branch :
Steam Engine, Opposite Ruby Project Office, Umele Gaon, Naigaon West. Vasai.

Shopping cart